Removed hub grease cup (by destroying it). I believe you can get plastic ones.
Releaved the peened section of the hub nut.
Using a 44mm socket (or 1 3/4") and a long
tube, removed hub nut.
Slacken off brake adjuster cams.
Turn them
towards the cylinder by 1/4 turn.
Even with the adjuster cams slackened off the
drum was still tight on the shoes.
Removed shoe steady pin slot washer. (That's
what the Haynes manual calls it.)
Bent back the lockwasher tabs and unscrewed the
lower shoe pivot nuts. Removed shoes.
The cylinders are siezed so will have to come
out - but how?
Can get an open-ended 10mm spanner on the nut but there is no room to
turn it. The white lines show the obstructions.
A ring spanner won't go on, either.
A posting to 2CV-L reveals that
in France they use a tool called 'clé à pipe'. US brand 'Bahco' and
10mm 3/8" drive thinwall socket by S-K Facom recommended.